D-Link DSL-3682 User Manual page 25

Section 3 - Configuration
STEP 3: CONFIGURE 5G WIRELESS NETWORK
This step of the wizard allows you to configure your 5 GHz wireless network settings.
Enable Your Check this box to enable the 5 GHz wireless network.
Wireless Network:
Wireless Network Create a wireless network name for your network.
Name (SSID):
Visible networks conveniently advertise their existence to devices
Visibility Status:
looking for Wi-Fi networks to join. Invisible, or hidden, networks
do not. To join an invisible network users must manually input its
SSID. Note: Making a network Invisible is not a form of security.
Security Level:
Select a wireless security encryption option. The options, from least
secure to most secure, are None, WEP, WPA/WPA2-PSK, and WPA2-
PSK. Using WPA2-PSK security is recommended. Using WEP security
is not recommended, as it only offers a trivial amount of protection
for your wireless data and network. WEP is not supported by faster
wireless standards. Using None is not recommended because any
wireless client will be able to access your network, be able to use
your Internet connection, and leaves you open to security threats.
__________ Key :
Create a Wi-Fi password (between 8-63 characters). Your wireless
clients need this key to join your wireless network. The longer your
password, the more secure your data. For improved security, you
should change your wireless password every three to six months.
Click Next to continue.
D-Link DSL-3682 User Manual
Wizard - Step 3 - 5G Wireless
STEP 3: CONFIGURE 5G WIRELESS NETWORK → 4
Your wireless network is enabled by default. You can simply uncheck it to disable it and click "Next" to skip configuration
of wireless network.
☑
Enable Your Wireless Network :
Your wireless network needs a name so it can be easily recognized by wireless clients. For security purposes, it is highly
recommended to change the pre-configured network name.
Wireless Network Name (SSID) : Your_5G Wi-Fi_Network
Select "Visible" to publish your wireless network and SSID can be found by wireless clients, or select "Invisible" to hide
your wireless network so that users need to manually enter SSID in order to connect to your wireless network.
Visibility Status : ž Visible š Invisible
In order to protect your network from hackers and unauthorized users, it is highly recommended you choose one of the
following wireless network security settings.
š None š WEP ž WPA/WPA2-PSK
Security Mode: WPA/WPA2-PSK
Select this option if your wireless adapters support WPA/WPA2-PSK.
Now, please enter your wireless security key :
WPA/WPA2-PSK Pre-Shared Key : A_Str0nG_P@ssW0rd!%!
(8-63 characters, such as a~z, A~Z, or 0~9, i.e. '%Fortress123&')
Note: You will need to enter the same key here into your wireless clients in order to enable proper wireless connection.
Back Next
š WPA2-PSK
Cancel
20