Identifier
Status
Removing the media-card reader
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Prerequisites
1
Remove the
back
2
Remove the stand.
3
Remove the
inner
Identifier
Status
Procedure
1
Disconnect the media-card reader cable (SDRDC1) from the media-card reader.
2
Disconnect the side I/O-board cable (MB-SUSBC) from the side I/O-board.
GUID-8463F48A-CCD9-49E5-BB12-65A95A85DBFF
Released
computer. After working inside your computer, follow
After working inside your
GUID-F35C996A-766A-42C4-AF15-BDAAFABE98EB
Released
cover.
frame.
GUID-1BFAB869-4A35-42A0-8D4A-9D469D55FB9A
Released
computer. For more safety best
www.dell.com/
Before
49