Steps
1. Place the antenna modules on the chassis.
2. Align the captive screws on the antenna modules with the screw holes on the chassis.
3. Replace the two screws (M2x3) that secure the antenna modules to the chassis.
4. Route the antenna cables through the slot on the chassis and route the antenna cables through the routing guides on the
chassis.
Next steps
1. Install the
wireless
card.
2. Install the
HDD and ODD
3. Install the
3.5-inch hard
4. Install the
front
cover.
5. Install the
left-side
cover.
6. Follow the procedure in
Media-card reader (optional)
Removing the media-card reader
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
3. Remove the
front
cover.
4. Remove the
3.5-inch
5. Remove the
HDD and ODD
About this task
The following image(s) indicate the location of the media-card reader and provides a visual representation of the removal
procedure.
36
Removing and installing components
cage.
drive.
After working inside your
Before working inside your
cover.
drive.
cage.
computer.
computer.