To Move The Driving Position To A Programmed Position; Using A Programmed Key - Mazda 6 Owner's Manual

Essential Safety Equipment
Seats
To move the driving position to a
programmed position
(Using a button on the side of the seat)
1. Make sure the parking brake is on.
2. (Automatic transaxle)
Make sure the selector lever is in the P
position.
3. Start the engine.
4. Press the programming button for the
driving position you want to call up
(button 1 or 2).
5. A beep sound is heard when the driving
position adjustment is completed.
NOTE
If the driving position movement is
not changed, only the beep sounds.
A seat position can be called up even
with the engine not running.
The driving position adjustment is
cancelled in the following cases:
Any of the seat adjustment
switches is operated.
The SET button is pressed.
Programming button 1 or 2 is
pressed.
The key button or
operated.
The vehicle starts moving.
The active driving display is
adjusted.
2–10
button is

(Using a programmed key)

1. Unlock the doors by pressing a request
switch or the key
2. After unlocking the doors, the seat
position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is nished.
3. Make sure the parking brake is on.
4. (Automatic transaxle)
Make sure the selector lever is in the P
position.
5. Start the engine.
6. The active driving display adjustment
begins.
NOTE
If there is no driving position
movement, a beep is not heard.
The driving position adjustment is
cancelled in the following cases:
Any of the seat adjustment
switches is operated.
The SET button is pressed.
Programming button 1 or 2 is
pressed.
The key button or
operated.
The vehicle starts moving.
The active driving display is
adjusted.
button.
button is