Using Distance Alert*
Distance Alert can be set to different time inter-
vals and can also be deactivated.
Activate/deactivate
Distance alert
Tap the
in the center display's Function
view.
•
GREEN indicator light: Distance Alertis acti-
vated
•
GRAY indicator light: Distance Alert is deac-
tivated
Distance Alert is activated automatically when the
engine is started.
Setting a time interval
button
Controls for setting a time interval
Reduce the time interval
Increase the time interval
Distance/time indicator
–
Press button (1) or (2) on the left-side steer-
ing wheel keypad to reduce or increase the
time interval to the vehicle ahead.
> The indicator (3) shows the current time
interval.
Different time intervals to the
vehicle ahead can be selected
and are shown in the instru-
ment panel as 1–5 horizontal
bars. The greater the number of
bars, the longer the time inter-
val.
DRIVER SUPPORT
One bar between the vehicles represents a time
interval of approximately 1 second; 5 bars is
approximately 3 seconds.
The same symbol appears if Adaptive Cruise
Control is activated.
NOTE
•
The greater the vehicles' speed, the
greater the distance between them for a
set time interval.
•
The set time interval is also used by
Adaptive Cruise Control and Pilot Assist*.
•
Only use time intervals permitted by local
traffic regulations.
WARNING
•
Only use a time interval that is suitable in
current traffic conditions.
•
A short time interval gives the driver lim-
ited reaction time if an unexpected situa-
tion occurs in traffic.
Related information
•
Distance Alert* (p. 268)
269
* Option/accessory.