Table of Contents
Advertisement
DRIVER SUPPORT
||
Activating ACC (putting it in active
mode and setting a speed)
Before ACC can be put in active mode:
•
The driver's seat belt must be buckled and
the driver's door must be closed.
•
There must be a vehicle ahead (a target vehi-
cle) within a reasonable distance or your
vehicle's current speed must be at least
9 mph (15 km/h).
–
With the
symbol (4) displayed (ACC is in
standby mode), press the
the left-side steering wheel keypad.
> This puts ACC in active mode and sets
the vehicle's current speed, which is indi-
cated by digits in the center of the speed-
ometer.
274
•
The higher speed is the one set in ACC
•
The lower one is the speed of the vehicle
ahead (the target vehicle).
Related information
•
Adaptive Cruise Control (ACC)* (p. 270)
•
Setting an Adaptive Cruise Control (ACC)
time interval (p. 275)
•
Deactivating/resuming Adaptive Cruise
Control (ACC) (p. 276)
button (1) on
The time interval to the vehi-
cle ahead will only be shown
when two vehicles are dis-
played.
A speed interval will also be
indicated:
Changing Adaptive Cruise Control
(ACC) speed
ACC makes it possible to set various speeds.
Changing a set speed
Function buttons and symbols
–
Change a set speed by pressing the
or
(3) buttons briefly or by pressing and
holding them:
•
Press briefly: each press changes speed
in +/– 5 mph (+/– 5 km/h) increments.
•
Press and hold: release the button when
the set speed indicator (4) has moved to
the desired speed.
•
The most recently set speed will be stored in
the function's memory.
If speed is increased by pressing the accelerator
pedal before the
button is pressed, the vehi-
(1)
* Option/accessory.
Advertisement
Table of Contents
