Control Power Supply; Basic Functions - Philips AZ2555 User Manual

English
SUPPLIED ACCESSORIES
– remote control
– USB cable
– video cable
– CD-ROM USB PC LINK installers
TOP AND FRONT PANEL (See 1)
1 p - 3.5 mm stereo headphone jack.
Note: The speakers will be muted when headphones
are connected to the set.
2 VOLUME -adjust volume level or equalizer level
(BASS/ MID /HIGH)
3 STANDBY ON y - switch the set on/ off.
4 SOURCE - selects sound source for functions: CD/
TUNER/ USB PC LINK/ GAME •AUX
5 IR SENSOR -infrared sensor for remote control
6 LCD Display - shows the status of the set
7 [dB]: - display to indicate bass power.
-,
+
8 PRESET - selects a preset radio station.
SEARCH ∞ , §
CD: - searches backward or forward within a track;
- skips to the beginning of a current track/ previous/
later track.
USB PC LINK - skips to the beginning of a previous/
later track.
TUNER: - tunes to radio stations
2;- starts or pauses CD / USB PC LINK playback
9 - stop CD / USB PC LINK playback;
- erases a CD program.
MODE - selects different CD play modes: e.g.
REPEAT or SHUFFLE order.
- shows current track name in USB PC
LINK mode
9 USB - connect the supplied USB cable here to the
USB port of your computer
0 GAMESOUND - select sound effects: BLAST/
PUNCH/ SPEED/ NORMAL in GAME •AUX mode
WOOX - selects special bass enhancement on/ off
EQUALIZER - selects bass, mid and treble
frequencies, and volume BASS/ MID /HIGH/ VOL
PROG
CD: - programs tracks and reviews the
programmed songs;
TUNER: - programs preset radio stations.
FM•AM - selects FM / AM waveband
CONTROL
! AUDIO IN ( LEFT / RIGHT) - LINE-IN jack for
external audio appliance.
VIDEO IN - to keep video plug in place
@ OPEN•CLOSE – press to open/ close CD door
BACK PANEL (See 1)
# Telescopic antenna - improved FM reception
$ Battery compartment - for 8 batteries, type
R-20, UM-1 or D-cells
% AC MAINS - inlet for power cord
^ VIDEO OUT- connect to the VIDEO IN jack on a
TV or VCR for viewing or recording.
REMOTE CONTROL (See 1)
1 CD - selects CD sound source
TUNER - selects tuner source / wavebands
USB - selects USB PC LINK
AUX - selects GAME •AUX
2 y -switches the set to standby / on if set
operating on AC power. (Switches set off only if
battery powered)
3 REPEAT - repeat all tracks in USB PC LINK source
or selects the repeat modes in CD source
SHUFFLE - plays CD tracks in random order in CD /
USB PC LINK source
MUTE - interrupts/ resumes sound
4 VOL 4, 3 -- adjust volume level or adjust equalizer
level (BASS/ MID /HIGH)
5 ¡ , ™ - select previous/ next track in CD / USB PC
LINK playback
9 - stop CD / USB PC LINK playback;
- erases a CD program.
2; - starts or pauses CD or USB PC LINK playback
5 / 6 - searches backwards/ forwards within a CD
track.
TUNER: - tunes to radio stations
6 EQUALIZER -- selects bass, mid and treble
frequencies
WOOX -- select special bass enhancement on/ off
GAMESOUND - select sound effects: BLAST/
PUNCH/ SPEED/ NORMAL in game mode
-,
+
7 PRESET , - selects a previous/ next radio
preset station
POWER SUPPLY
CAUTION
Use of controls or adjustments or performance
of procedures other than herein may result in
hazardous radiation exposure or other unsafe
operation.
POWER SUPPLY
Whenever convenient, use the power supply to
conserve battery life. Make sure you remove the
power cord from the set and wall jack before inserting
batteries.
Batteries (not included) (See 1)
• Insert 8 batteries, type R-20, UM-1 or D-cells,
(preferably alkaline) with the correct polarity.
Remote control (See A)
• Insert 2 batteries, type AAA, R03 or UM4
(preferably alkaline).
Incorrect use of batteries can cause electrolyte leak-
age and will corrode the compartment or cause the
batteries to burst.
• Do not mix battery types: e.g. alkaline with carbon
zinc. Only use batteries of the same type for the
set.
• When inserting new batteries, do not try to mix old
batteries with the new ones.
• Batteries contain chemical substances, so
they should be disposed of properly.
Using AC Power
1. Check if the AC power supply, as shown on the
type plate located on the bottom of the set,
corresponds to your local power supply. If it does
not, consult your dealer or service center.
2. If your set is equipped with a voltage selector,
adjust the selector so that it matches with the
local power supply.
3. Connect the power cord to the wall jack and the
set is now ready for use.
4. To disconnect the power supply, unplug the set
from the wall jack.

BASIC FUNCTIONS

POWER-SAVING AUTOMATIC STANDBY
As a power-saving feature, the system automatically
switches to standby 15 minutes after CD has reached
the end and no control is operated.
The type plate is located on the bottom of
the set.
BASIC FUNCTIONS
Switching on and off and selecting function
1. Press STANDBY ON y on the set to switch on.
2. Press SOURCE once or more to select your
desired function: CD, TUNER, USB PC LINK or
GAME•AUX .
3. Press STANDBY ON y to switch off the set.
Note : The tone, sound settings, tuner presets and
the volume level (up to a maximum volume level of
VOL 20 ) will be retained in the set's memory.
Adjusting volume and sound (See 2)
1. Adjust the volume with the VOLUME control.
= Display shows the volume level
number from 0-32.
2. wOOx
To enhance the bass response: press wOOx once or
more to switch on / off.
= wOOx-key backlight lights up when wOOx is
turned on.
Notes:
- wOOx can be used when you play TUNER, CD, USB
PC LINK and GAME•AUX source.
- To prevent sound interference the bass control
options operate exclusively. You cannot combine the
bass from EQUALIZER with wOOx
- Some discs might be recorded in high modulation,
which causes a distortion at high volume. If this
occurs, deactivate wOOx or reduce the volume.
and a