Philips AZ2555 User Manual page 9

CD PLAYER
5. Repeat the above four steps to store other
stations.
Note : You can erase a preset station by storing
another frequency in its place.
To listen to a preset station
-
+
Press PRESET / once or more until the desired
preset station is displayed.
CD Operation
Playing a CD
This CD player plays Audio Discs including
CD-Recordables and CD-Rewritables.
1. Press STANDBY ON y once or more to on, then
select CD SOURCE.
2. Press OPEN•CLOSE to open the CD door.
]
is displayed when the CD door is
open.
3. Insert a CD with the printed side facing up and press
down on OPEN•CLOSE to close the CD door.
]Display show
, then scrolls
, or
if no CD inserted/ CD dirty,
incorrectly inserted or damaged.
4. Press 2; to start playback.
5. To pause playback press 2;. Press 2; again to
resume play.
= Time digits flashes during pause.
6. To stop CD playback, press 9.
Note: CD play will also stop when:
– the CD door is opened
– the CD has reached the end
– you select an other sound source.
Selecting a different track
• Press SEARCH ∞ or § (on the remote control ¡
or ™) once or repeatedly until the desired track
number appears in the display.
• If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press 2; to start playback.
CD PLAYER
Finding a passage within a track
1. Press and hold SEARCH ∞ or §.
– The CD is played at high speed and low volume.
2. When you recognize the passage you want,
release ∞ or §. Normal playback continues.
Note: During a CD program or if SHUFFLE/ REPEAT
is active, searching is only possible within the same
track.
Different play modes: SHUFFLE and REPEAT (See
4 - 7)
You can select and change the various play modes
before or during playback. The play modes can also be
combined with PROGRAM.
SHUFFLE - tracks of the entire CD/ program are
played in random order
SHUFFLE REPEAT ALL - to repeat the entire CD/
program continuously in random order
REPEAT ALL - repeats the entire CD/ program
REPEAT - plays the current track continuously
1. To select play mode, press MODE once or more.
(SHUFFLE / REPEAT on the remote control).
2. Press 2; to start playback if in the stop position.
]If you have selected SHUFFLE, playback starts
automatically.
3. To select normal playback, press MODE
repeatedly until the various modes are no longer
displayed.
– You can also press the 9 to cancel your play
mode in playing.
Programming track numbers
Program in the stop position to select and store your
CD tracks in the desired sequence. If you like, store
any track more than once. Up to 20 tracks can be
stored in the memory.
1. Press SEARCH ∞ or § on the set to select your
desired track number.
2. Press PROG to confirm the track number to be
stored.
=Display: The number of the tracks programmed
and the total playing time of programmed tracks
GAMESOUND
is shown briefly PROG flashes.
=If you attempt to program without first selecting
a track number, is shown.
3. Repeat steps 1-2 to select and store all desired
tracks.
=Display:
if you try to program more
than 20 tracks.
4. To start playback of your disc program, press 2; .
Note: During normal playback, you can press PROG
to add a current track to your program list.
Reviewing the program
In stop / play position, press and hold down PROG for
a while until the display shows all your stored track
numbers in sequence.
Erasing a program
You can erase the program by:
• pressing 9 twice;
=
displayed briefly, and PROG
disappears.
• pressing STANDBY ON y
• selecting another sound sources
• opening the CD door.
GAMESOUND (See 8)
PLAYING WITH GAMESOUND:
1. Press SOURCE once or more on the set to select
the GAME•AUX function (AUX on the remote
control)
=Display scrolls :
2. Connect your console to the cinches on the front
of the set AUDIO IN ( LEFT / RIGHT) and VIDEO
IN.
3. Press GAMESOUND once or more to select your
game sound option.
= Display briefly shows
,
or
.
USB PC LINK
Connecting other equipment to your system
Use the supplied video cable to connect the VIDEO
OUT terminal on the back of the set to VIDEO IN on
a TV or VCR for viewing or recording.
USB PC LINK
Quick Setup Guide
PC system requirements
– USB port with Windows 98 / 98 SE / ME/ 2000/ XP
– Intel Pentium MMXX200 or higher
– CD-ROM drive
– Free hard disk space : 15 MB for the software
Installing MusicMatch software
1. Use the supplied USB cable to connect the set to the
USB port on your computer. (See B)
2. Press SOURCE (USB on the remote control) once or
more to select USB PC LINK.
3. Turn on your PC then insert the supplied USB PC LINK
installer disc in the PC's CD-ROM drive. This
application software can also be downloaded from
http://www.audio.philips.com.
IMPORTANT!
Please use this customized MusicMatch
software for your USB PC Link application.
Remember to un-install all other MusicMatch
jukebox software first from your PC system (if
available).
4. The installation guide will appear automatically. If it
does not, go to the CD-ROM drive in Windows
Explorer and double click on the USB PC LINK.exe.
Then perform the following steps:
– Select your desired language from the list.
– Select installer driver.
– Select installer MusicMatch jukebox.
– Select other options (Tutorial, Free goodies, FAQ).
Note:
- You are advised to read the MusicMatch tutorial
,
before using it for the first time. Make sure the
volume on your PC is suitably adjusted to ensure
sound output on the set. For optimum performance,
the equalizer function in MusicMatch should be set to
a low level.