Table of Contents
Advertisement
2. Press and hold down the "M" (Memory)
button.
3. With the "M" button depressed, press
memory button 1 to store the seat's
current position.
To move the seat to the position that it was in
when memory button 1 was programmed,
press and hold down button 1 until the seat
stops moving.
As a safety precaution, the seat will stop
automatically if the button is released before
the seat has reached the preset position.
Central locking system remote control
and driver's seat memory
The remote control transmitter can also be
equipped with an optional function that con-
trols the electrically operated driver's seat
and door mirrors in the following way:
1. Adjust the seat and door mirrors to the
desired position.
2. When you leave the car, lock it using
the remote control.
3. The next time the driver's door is
unlocked with the same remote control
and that door is opened within 2 min-
utes, the driver's seat and door mirrors
will automatically move to the position
that they were in when the doors were
most recently locked with the same
remote control.
NOTE
The memory function in the remote control
operates independently of the memory
function in the seat.
WARNING
• Because the driver's seat can be
adjusted with the ignition off, children
should never be left unattended in the car.
• Movement of the seat can be STOPPED
at any time by pressing any button on the
power seat control panel.
• Do not adjust the seat while driving. The
seat should be adjusted so that the brake
pedal can be depressed fully. In addition,
position the seat as far rearward as comfort
and control allow.
• The seat rails on the floor must not be ob-
structed in any way when the seat is in mo-
tion.
04 Interior
Front seats
04
91
Advertisement
Table of Contents
