Table of Contents
Advertisement
09 Maintenance and servicing
Replacing bulbs
09
Low beam bulb
2. Press the retaining spring upward and
slightly to the left until it snaps into
place.
3. Press the wiring connector onto the
bulb.
4. Put the plastic cover in place.
5. Press the retaining clamps back into
place.
6. Reinstall the headlight housing.
200
High beam bulb
1. Open the hood.
2. Remove the headlight housing.
3. Turn the bulb holder counterclockwise
and pull it out. Replace the bulb. Note
how the bulb holder is positioned.
4. Reinstall the bulb holder. It can only be
installed in one position.
5. Reinstall the headlight housing.
Parking light bulb
1. Pull out the bulb holder with a pair of
pliers. The bulb holder should not be
pulled out by the wire.
2. Replace the bulb.
3. Press the bulb holder back into place. It
can only be installed in one position.
Advertisement
Table of Contents
