Left-Side Steering Wheel Lever - Volvo C70 Owner's Manual

Hide thumbs Also See for C70:
Table of Contents

Advertisement

Lever positions
1. Turn signals, lane change position
2. Turn signals, position for normal turns
3. High beam flash
4. Toggle between high and low beams,
Home Safe lighting
Turn signals
When turning
• Move the lever as far up or down as
possible (to position 2) to start the turn
signals.
The turn signals will be cancelled automati-
cally by the movement of the steering wheel,
or the lever can be returned to its initial posi-
tion by hand.
When changing lanes
The driver can automatically flash the turn
signals 3 times by:
• Moving the turn signal lever up or down to
position 1 and releasing it.
• Moving the lever up or down to position 2
and immediately back to its original posi-
tion.
NOTE
• This automatic flashing sequence can be
interrupted by immediately moving the lever
in the opposite direction.
• If the turn signal indicator flashes faster
than normal, check for a burned-out turn
signal bulb.
High/low beam headlights
Continuous high beams
1. Turn the ignition key to position II.
2. With the light switch (1) in position
(see page 55) pull the turn signal lever
toward the steering wheel (position 4) to
toggle between high and low beams.
02 Instruments and controls

Left-side steering wheel lever

High beam flash
1. Turn the ignition key to position II.
2. Pull the turn signal lever to position 3. The
high beams will remain on until the lever
is released.
Home safe lighting
When you leave your car at night, you can
make use of the home safe lighting function
to illuminate the area in front of the car.
1. Remove the key from the ignition switch.
2. Pull the direction indicator lever as far as
possible towards the steering wheel (to
position 4) and release it.
3. Exit the car and lock the doors.
The headlights and parking lights will illumi-
nate and remain on for 30
onds. The time interval can be changed
according to your preferences by using the
Personal Settings function, see page 72 for
more information.
,
1
Factory setting
02
1
, 60 or 90 sec-
57

Advertisement

Table of Contents
loading

Table of Contents