06 Starting and driving
Detachable trailer hitch
Installing the ball holder
C
D
A
A - ball holder (1 7/8" ball), B - locking bolt, C -
cotter pin, D - hitch assembly, E - safety wire
attachment
1. If necessary, remove the cotter pin (C)
06
from the locking bolt (B) and slide the
locking bolt out of the hitch assembly (D).
2. Slide the ball holder (A) into the hitch
assembly (D).
3. Align the hole in the ball holder (A) with
the one in the hitch assembly (D).
4. Slide the locking bolt (C) through the
hitch assembly (D)/ball holder (A).
5. Insert the cotter pin (C) in the hole at
the end of the locking bolt (B).
148
Removing the ball holder
1. Remove the cotter pin (C) from the lock-
ing bolt and slide the locking bolt (B) out
of the ball holder (A)/hitch assembly (D).
2. Pull the ball holder (A) out of the hitch
assembly (D).
NOTE
A cover for the hitch assembly is also
included in the kit.
E
B