Table of Contents
Advertisement
Accessing the rear seat-Easy Entry
Easy entry (power seat shown)
Move the seat belt from the guide before
entering the rear seat. See page 15.
Manual seat
Moving the seat forward:
1. Pull up control 1 (see the illustration
above) to release the backrest.
2. Tilt the backrest forward and slide the
seat forward.
Moving the seat rearward:
1. With the backrest tilted forward, move the
seat rearward to the desired position.
2. Pull up control 1 and return the back-
rest to the upright position.
Power seats
Easy entry is only intended to be used when
the front seat in unoccupied.
Moving the seat forward:
1. Pull up control 1 (see the illustration to the
left) to release the backrest.
2. Tilt the backrest forward.
3. Press and hold down button 2 (see the
illustration to the left) to move the seat
forward.
Moving the seat rearward:
1. Press and hold down button 2 until the
seat has returned to its original position.
2. Pull up control 1 and return the back-
rest to the upright position.
NOTE
• The backrest must be folded down in
order to move the seat forward as far as
possible to simplify entry into the rear seat.
• If the seat is returned to the upright posi-
tion when it is as far forward as possible, it
will automatically move rearward approxi-
mately 2 in. (6 cm) after several seconds.
04 Interior
Front seats
WARNING
After the seat has been returned to its origi-
nal position, be sure that the backrest is
securely locked in the upright position.
04
89
Advertisement
Table of Contents
