Table of Contents
Advertisement
The patient is added to the patient list.
2
Repeat to add any additional patients as necessary.
Tip
You can register up to 100 patients to the patient list.
When you exceed 100, existing patients will be
overwritten automatically starting with the oldest.
To recall patients
Recall patients that have been registered in advance.
1
Select [Call List] in the [Recording Preparation]
screen, and press the ENTER button.
The [Patient List] screen appears.
2
Select the target patient, and press the ENTER button
to select its check box.
3
Select [Execute], and press the ENTER button.
The [Recording Preparation] screen appears again,
and the patient information will be applied in the
[Recording Preparation] screen.
To edit registered patient settings
Edit patient information and save settings for recorded
data that were registered in advance.
1
Select [Call List] in the [Recording Preparation]
screen, and press the ENTER button.
The [Patient List] screen appears.
2
Select the patient for which you want to edit settings,
and press the ENTER button to select its check box.
3
Select [Change], and press the ENTER button.
The [Change Patient List] screen appears.
4
When you finish editing settings, select [Apply] and
press the ENTER button.
The [Patient List] screen appears again.
5
Select [Execute], and press the ENTER button.
The [Recording Preparation] screen appears again.
To delete registered patients from the list
Delete patients that were registered in advance from the
list.
1
Select [Call List] in the [Recording Preparation]
screen, and press the ENTER button.
The [Patient List] screen appears.
2
Select the patient to delete, and press the ENTER
button to select its check box.
3
Select [Delete], and press the ENTER button.
4
Select [OK] when the confirmation message appears,
and press the ENTER button.
The patient entry is deleted.
5
Select [Back], and press the ENTER button.
The [Recording Preparation] screen appears again.
Test Recording
Confirm whether images record properly.
When you perform a test recording, images record for 5
seconds and then play back automatically.
1
Select [Test Record] in the [Recording Preparation]
screen, and press the ENTER button.
2
Select [OK] when the confirmation message appears,
and press the ENTER button.
Recording starts, and a message indicating that test
recording is in progress appears throughout the
process.
After 5 seconds of recording, playback starts
automatically.
When test recording is finished, the [Recording
Preparation] screen appears again.
3
Select [Done], and press the ENTER button.
The [MENU] screen appears again.
45
Advertisement
Table of Contents
