Test Recording - Sony HVO-1000MD User Manual

3
Use the V , v , B , and b buttons to select [Change], and
press the ENTER button.
The [Change Patient List] screen appears.
4
When you finish editing settings, use the V , v , B , and
b buttons to select [Apply], and press the ENTER
button.
The [Patient List] screen appears again.
Deleting Registered Patients from the List
Delete patients that were registered in advance from the
list.
1
In the [Recording Preparation] screen, use the V , v , B ,
and b buttons to select [Call List], and press the
ENTER button.
The [Patient List] screen appears.
54
Recording Preparation
2
Use the V and v buttons to select the patient to delete,
and press the ENTER button.
The check box of the patient is selected.
3
Use the V , v , B , and b buttons to select [Delete], and
press the ENTER button.
The patient entry is deleted.

Test Recording

Confirm whether images record properly.
When you perform a test recording, images record for five
seconds and then play back automatically.
1
In the [Recording Preparation] screen, use the V , v , B ,
and b buttons to select [Test Record], and press the
ENTER button.
The following message appears.