Led Explanation; Button Description - TP-Link Archer Air E5 User Manual

Chapter 1
1 2 1

LED Explanation

You can check the extender's working status by following the LED Explanation table.
Name
1 2 2

Button Description

Button
(WPS)
Reset
Status
The extender is not powered or not powered by a
Off
standard power source.
Quickly
The system is starting up or firmware upgrade is in
pulsing
progress.
blue
Quickly WPS connection failed. The extender will return to
pulsing red unconnected status in one minute.
Slowly
pulsing WPS Connection is in progress
blue
Slowly The extender is not connected to the router's wireless
pulsing red network.
The extender is connected to the router's wireless
Solid blue
network and is in a suitable location.
The extender is connected with a weak signal. Try
Solid red
relocating it closer to your router.
Press the WPS button on your router. Within 2 minutes, press the WPS
button on the extender for 1 second. The WPS LED should change
from pulsing blue to solid blue, indicating successful connection.
With the extender powered on, use a pin (provided) to press the RESET
button for 5 seconds to reset the extender to its factory default settings.
Get to Know About Your Extender
Indication
Description
5