Viewing The Ip Camera Remotely From A Pc - Aztech WIPC411FHD User Manual

User Manual
2. On the utility, click the Find button, and then select the IP Camera on the
Equipments list to set the IP Camera's IP address. The Equipments list will list
down all the connected IP cameras to your router.
NOTE: If your IP camera has a static IP address, it would not be detected by
the Utility.
3. Click the Open button beside the Internal Access field, and you will
automatically be redirected to the Web User Interface of your WIPC411FHD.

Viewing the IP Camera REMOTELY from a PC

If you want to remotely view your HOME IP Camera OUTSIDE or from the OFFICE,
you can use the WIPC411FHD Utility to get the DDNS Link or the External Access
Link.
NOTE : For the external access address / DDNS Link to work, a successful port
forwarding setup for your HOME IP CAMERA (or for each IP Camera that you
have at home) on your HOME ROUTER is needed. You may refer to the Port
Forwarding section of this user manual for more detailed instructions.
To access the HOME IP CAMERA remotely, on the WIPC411FHD Utility:
a. Select the camera that you want to access remotely on the Equipments list.
b. Click the Get button (beside the External Access field).
c. On the Validate Authentication window, enter admin as its username and
password.
12