Charging; Charge Level Indicators; Vacuum Feature; C Getting Started - Remington HC6550 Instructions Manual

ENGLISH
C VACUUM FEATURE
The Vacuum technology captures the majority of head hair
as it is cut. The hairs are vacuumed into an easy empty
vacuum chamber located on the front of the clipper. It is
recommended that you empty the vacuum chamber one it
becomes full by pushing the vacuum chamber release
button, pulling the chamber away from the clipper (See
Figure A) and emptying the trimmings into a bin.
To reattach the bin, angle the bin down towards the blade to
engage the single latch near the blade. Then rotate the back
end until the release latch is reengaged and clicks into place

C GETTING STARTED

, CHARGING YOUR APPLIANCE
, Note: It is recommended to fully charge your appliance before using for the
first. Please refer to the charge times shown in this book.
• Ensure the product is switched off.
• This appliance should be supplied with approved safety isolating adaptors
HKP18-1201200dV (EU), HKP18-1201200dB (UK) with the output capacity of
12 Vdc; 1.2A (adaptor output).
• The adaptor automatically adjusts to a main voltage between 100V and 240V.
• Connect the charging adaptor to the product then to the mains.

, CHARGE LEVEL INDICATORS

Charge Level

Charging

Empty
Fully Charged
• Run time from fully charged is up to 60 mins.
• Charge time from empty is 4 hours.
• To preserve the life of your batteries, let them run out every 6 months then
recharge for 4 hours.
4
Indicator
LED flash slowly
LED flash rapidly
LED solid
Fig. A