Remington HC6550 Use And Care Manual

IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should always be observed,
including the following; read all instructions before using this appliance.
DANGER
HC6550
To reduce the risk of electric shock:
■ Do not use in area that can be dropped into a sink or bath.
Make sure the power adapter and cord do not get wet. Do not plug or unplug the
■
appliance with wet hands.
■ Do not reach for an appliance that has fallen into water. Unplug it immediately.
■ Do not use while bathing or in the shower.
Do not place or drop into water or other liquid.
■
■ Do not place or store this appliance where it can fall or be pulled into a tub or sink.
■ Except when charging, always unplug this appliance from the electrical outlet
immediately after using.
Unplug this appliance before cleaning it.
■
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■ This appliance is for household use only.
■ An appliance should never be left unattended when it's plugged in, except when
charging a rechargeable appliance.
Close supervision is necessary when this appliance is used by, on, or near
■
children or persons with special needs.
■ Use this appliance only for its intended use as described in this manual.
Use and Care Guide
■ Do not use attachments not recommended by the manufacturer.
Keep the cord away from heated surfaces.
■
Register Your New Product Today!
■ Never operate this appliance if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or if it has been dropped into water.
By registering your new Remington ® product, you will receive these important benefits:
If any of these things happen, return the appliance to an authorized service
Proof of Ownership • Product Protection • Product Registration • Special Offers
center for examination and repair.
Register online at: www.RemingtonProducts.com
■ Never drop or insert any object into any of the appliance's openings. Product Features
■ Do not use outdoors or operate where aerosol (spray) products are being used, or
where oxygen is being administered. Remington hair clippers provide a quick and easy way to create
®
professional-looking haircuts. Developed to combine professional grade blades with
■ Make sure the cord is disconnected from the clipper while storing this appliance
premium guide combs, this hair clipper enables you to achieve customized, modern
and cord in a moisture-free area. Do not store it in temperatures exceeding
looks and traditional hairstyles. To help you create those styles, and to extend the
140°F (60°C).
life of your hair clipper, please read all instructions before using.
Do not use this appliance with a damaged or broken cutter unit, as injury may
■
occur. Always make sure blades are aligned properly.
■ Always attach plug to appliance and then the adapter to the outlet. To disconnect,
turn all controls to OFF, then remove adapter from outlet, then detach power cord
from the clipper for storage.
3
■ Do not use an extension cord or a voltage converter with this appliance.
■ Do not wrap the cord around the appliance.
■ Dispose of batteries properly. Do not incinerate. Batteries may explode if
overheated. Do not wrap in metal or aluminum foil. Wrap in newspaper before
discarding. It is suggested that you contact local battery redemption site(s) in
your area.
7
SAVE THESE INSTRUCTIONS
1
Blade Removal
1. Unit must be off. Hold unit securely in
one hand. Grip blade and push with
your thumb the top of the blade away
from the unit.
2. Use enough force to move the blade
off the retaining snaps and rotate
blade off bottom tab.
3. Pull blade away from unit. Reverse
2
4
order to reattach blade.
6
1. On/off switch
2. Blade set
3. Vacuum intake
4. 11 attachment guide combs
5. Charging indicator
6.
Easy removable vacuum chamber
5
7. Vacuum chamber release button
8. Travel pouch (not shown)
9. Adaptor (not shown)
10. Cleaning brush (not shown)
11. Oil bottle (not shown)
Attaching Guide Comb How to Use
Charging Your Hair Clipper
■ Clipper must be turned off.
■ Insert the adapter plug into the bottom of the clipper and plug the adapter unit
into a power outlet. The indicator light will blink to indicate that it is charging.
The indicator light will remain on when the clipper is fully charged.
■ The clipper will be fully charged in 3–5 hours. A full charge provides up to 60
minutes of cordless use.
■ The batteries cannot be overcharged, but we recommend that charging be
discontinued if the clipper will not be used for a long period of time.
■ If the clipper has not been used for a month or longer, it is advisable to
recharge it for 3–5 hours.
■ To preserve the life of the batteries, discharge them by running the clipper until
1. Guide combs should be installed by first hooking the blade teeth to front side of
the blades move slowly. Switch off and fully recharge. Do this every six months.
guide comb. Then press the back of the guide comb down until it snaps into place.
■ Charge the clipper at temperatures between 40º–90ºF.
2. Ensure comb is attached before beginning to cut hair.
■ Lithium Ion batteries included. See battery removal section for
3. To remove, pull the snap tab on back side of guide comb and pull the comb off.
proper disposal of batteries.
Charge Level Indicators
Hair Length Settings
Charge Level
Comb Guide Number: Haircut comb: Charging
Low
0 1/16" (1.5mm)
Fully Charged
1 1/8" (3mm)
2 1/4" (6mm)
Before Cutting Hair
1. Make sure your hair clipper is operating correctly.
3 3/8" (9mm)
2. The vacuum feature will not function properly if the hair chamber is removed.
4 1/2" (12mm)
3. The person should be seated so that the top of his head is at your eye level.
4. Comb the hair as it is normally styled.
5 5/8" (16mm)
5. Comb out all knots and tangles.
6 3/4" (18mm)
6. Ensure the hair is dry. Hair clippers perform best with dry
hair, making it easier to see how much hair is being cut.
7 7/8" (22mm)
7. Hold the hair clipper in the palm of one hand with your
8 1" (25mm) thumb resting firmly on the top of the hair clipper. This grip
provides comfortable cutting control.
Indicator
LED flash slowly
LED flash rapidly
LED solid