Copying A Saved Song (Copy Song); Deleting A Saved Song (Delete Song) - Roland FP-90 Owner's Manual

Advanced Operation

Copying a Saved Song (Copy Song)

Songs that have been saved in internal memory can be copied to
USB flash drive. Alternatively, songs stored on a USB flash drive can
be copied to internal memory.
* Audio files cannot be copied.
* If a USB flash drive is not connected, you won't be able to perform
this operation.
1
Press the [Function] button, and then use the [K] [J]
buttons to select "Copy Song."
2
Press the [Function] (Enter) button.
The Copy Song screen appears.
3
Use the [–] [+] buttons to select the copy-source and copy-
destination memory locations.
4
Press the [J] button.
5
Use the [–] [+] buttons to select the song that you want to
copy.
If you decide to cancel, press the [Exit] button.
6
Press the [Function] (Enter) button.
The copy is executed.
NOTE
Never turn off the power or remove the USB flash drives while the
screen indicates "Executing.... "
MEMO
If a song with the same file name has already been saved, the
confirmation message "Overwrite?" appears. To overwrite the
song, use the [J] button to select "Yes, " and then press the
[Function] (Enter) button.
7
Press the [Exit] button several times to exit Function mode.
12

Deleting a Saved Song (Delete Song)

Here's how to delete a song that you saved on an internal memory or
USB flash drive.
MEMO
If you want to delete all songs that have been saved to internal
memory or USB flash drive, initialize the memory (p. 17).
* If you want to delete a song on the USB flash drive, connect your
USB flash drive to the USB Memory port before you continue.
1
Press the [Function] button, and then use the [K] [J]
buttons to select "Delete Song."
2
Press the [Function] (Enter) button.
The Delete Song screen appears.
3
Use the [–] [+] buttons to select the memory location that
contains the song you want to delete.
4
Press the [J] button.
5
Use the [–] [+] buttons to select the song that you want to
delete.
6
Press the [Function] (Enter) button.
A confirmation message appears.
If you decide to cancel, press the [Exit] button.
7
Use the [J] button to select "Yes," and then press the
[Function] (Enter) button.
The deletion is executed.
NOTE
Never turn off the power or remove the USB flash drives while the
screen indicates "Executing.... "
8
Press the [Exit] button several times to exit Function mode.