Copying A Saved Song (Copy Song); Renaming A Song (Rename Song) - Roland HP601 Owner's Manual

Advanced Operation
NOTE
Never turn of the power or disconnect the USB lash drive while
the screen indicates "Executing... "
8.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.

Copying a Saved Song (Copy Song)

Songs that have been saved in internal memory can be copied to USB
lash drive. Alternatively, songs stored on a USB lash drive can be
copied to internal memory.
* Audio iles cannot be copied.
* If a USB lash drive is not connected, you won't be able to perform this
operation.
1.
Press the [Ambience] button and [Brilliance] button
simultaneously.
2.
Use the [K] [J] buttons to select "Copy Song," and then
press the [s] (Enter) button.
The Copy Song screen appears.
3.
Use the [–] [+] buttons to select the copy-source and copy-
destination memory locations (internal memory or USB
lash drive).
4.
Press the [J] (right) button.
5.
Use the [–] [+] buttons to select the song that you want to
copy.
If you decide to cancel, press the [u] (Exit) button.
6.
Press the [s] (Enter) button.
The copy is executed.
NOTE
Never turn of the power or disconnect the USB lash drive while
the screen indicates "Executing... "
7.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.
12

Renaming a Song (Rename Song)

Here's how to rename a previously-saved song.
1.
Press the [Ambience] button and [Brilliance] button
simultaneously.
2.
Use the [K] [J] buttons to select "Rename Song," and then
press the [s] (Enter) button.
The Rename Song screen appears.
3.
Use the [–] [+] buttons to select the media (internal
memory or USB lash drive) that contains the song that you
want to rename.
4.
Press the [J] (right) button.
5.
Use the [–] [+] buttons to select the song that you want to
rename, and then press the [J] (right) button.
6.
Rename the song.
Select the position at which you want to
[K] [J] buttons
change the character.
Change the character.
[–] [+] buttons
If you decide to cancel, press the [u] (Exit) button.
7.
Press the [s] (Enter) button.
A conirmation message appears.
If you decide to cancel, press the [u] (Exit) button.
8.
Use the [J] (right) button to select "Yes," and then press the
[s] (Enter) button.
The song is renamed.
NOTE
Never turn of the power or disconnect the USB lash drive while
the screen indicates "Executing... "
9.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.