Listen To Music; Other Features; Set The Alarm Timer - Philips DC350/37 User Manual

Tip
•
To be heard more clearly, speak closer to the microphone.
•
If an echo is heard, reduce the volume of the main unit.
•
If you observe communication diffi culties, position the Bluetooth device closer to the main unit.

Listen to music

Note
•
You can listen to audio through this unit from devices that support A2DP or AVRCP.
•
As iPhone doesn't support Bluetooth audio streaming, this unit doesn't play audio fi les from
iPhone through Bluetooth connection.
1
Connect the Bluetooth device. (see 'Connect with a Bluetooth device' on page 21 )
2
On the Bluetooth device, start play.
You hear the music through the unit.
»
• To pause/resume play, press
• To skip to a track, press

8 Other features

Set the alarm timer

You can set two alarms which go off at different time.
1
Ensure that you have set the clock correctly. (see 'Set clock and date' on page 16 )
2
Press and hold ALM 1 or ALM 2 on the main unit for 2 seconds.
Hour digits blink.
»
[AL 1] (alarm 1) or [AL 2] (alarm 2) is displayed.
»
3
Press / repeatedly to set the hour.
4
Press ALM 1 or ALM 2 to confi rm.
5
Press / repeatedly to set the minute.
6
Press ALM 1 or ALM 2 to confi rm.
7
Press VOL +/- to set a volume level for alarm tone.
The volume level is applied to two alarms.
»
8
Press ALM 1 or ALM 2 to confi rm.
• To set the other alarm, repeat the steps 2 -8.
.
/ .
EN
23