Tip
•
This DC350 can memorize the connection information of up to 8 devices.
Receive a phone call
Note
•
You can receive phone calls through this DC350 with devices that support the HFP or HSP
profi le.
1
Connect the Bluetooth device. (see 'Connect with a Bluetooth device' on page 18 )
2
When a call is received, you hear the incoming call alert tone. Press PAIRING to
accept the call.
•
To reject the call, press
3
Speak into the MIC located on the front panel.
To increase or decrease the volume, press VOL +/- .
•
•
To mute the microphone, press MUTE . To unmute, press this button again.
•
To select to hear the audio from the device or from the DC350, press
PAIRING .
4
Press
to end the call.
Tip
•
To be heard more clearly, speak closer to the microphone.
•
If an echo is heard, reduce the volume of the DC350.
•
If you observe communication diffi culties, position the Bluetooth device closer to this DC350.
Listen to music
Note
•
You can listen to audio through this DC350 from devices that support A2DP or AVRC.
1
Connect the Bluetooth device. (see 'Connect with a Bluetooth device' on page 18 )
2
On the Bluetooth device, start play.
You hear the music through this DC350.
»
•
To pause/resume play, press
•
To skip to a track, press
20
EN
.
.
/
.