Listen To Radio; Tune To Fm Radio Stations; Play From An External Device - Philips AJ5300DB User Manual

2
Insert your iPod/iPhone into the dock.
SOURCE
3
For the first-time use, you will be asked to
install the HomeStudio app on your iPod/
iPhone.
4
Tap [Yes] (yes) to accept the installation
request.
5
Follow the on-screen instructions to
complete the installation.
Philips HomeStudio app only can be installed in
the following iPod, iPhone models:
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
Play music in the iPod/iPhone
Select a track from your iPod/iPhone playlist,
and then press .
» Music streams from your iPod/iPhone
to the clock radio.
Charge the iPod/iPhone
When your clock radio is connected to power,
the docked iPod/iPhone begins to charge
automatically.
Remove the iPod/iPhone
Pull the iPod/iPhone out of the dock.

Listen to radio

Note
•
Keep the unit away from other electronic devices to
avoid radio interference.
•
For better reception, do not place iPod/iPhone into
the dock when you listen to the radio. Fully extend and
adjust the position of the FM antenna.

Tune to FM radio stations

You also can tune to radio stations from your
clock radio.
1
Press SOURCE repeatedly to select FM
tuner.
2
Press and hold
of your clock radio for more than two
seconds.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a station manually:
Press / repeatedly until you find optimal
reception.

Play from an external device

You can also listen to an external audio device
through this clock radio.
1
Press SOURCE to select the AUX source.
/ on the back
EN 7