Save Submenu - Fluke tix640 User Manual

The "Load Gallery" submenu function can be used to
quickly find files from preview images.
After the function is started, the directories are shown as
index cards, the contents of which can be opened and
then displayed by preview images by using the the
joystick Enter button in each case. Within the gallery, the

joystick can be used for navigation purposes. In the
event of more than 20 directories and/or files, it is
possible to scroll out of the display area. In analogy to the
single image display, the joystick Enter button must be
pushed on the preview image to show the file in its
enlarged size. The functions available at this point
correspond to the functions of the single image display.

Save Submenu

Along with single image saving, the save button  of the
thermal imager can be used to save the following,
depending on the equipment:
thermal image sequences with the maximum frame
•
rate (real-time saving)
 "Real time",
series of single images (thermal image and photo)
•
 "Autocapture"
video sequences (thermal image, digital image, or
•
®
IR Fusion ) as AVI
 "Video".
The "Saving format" menu item can be used to set the
data and formats to be saved (see Saving Format
Submenu on page 3-25).
Real-time saving
The maximum writing speed possible for real-time saving
depends on the detector and the geometric resolution, as
well as on the properties of the used SDHC card.
In order to achieve the maximum real-time
saving frequency, we recommend using
transcend-extreme-speed SDHC cards. Please
check before starting real-time saving that
sufficient memory space is available on the used
SDHC card.
Display Menus
File Menu
Note
3-21
3