TiX640, TiX660, TiX1000
Users Manual
Saving with Check
To check the image to be recorded before saving it, the
Live mode should be stopped:
•
Push the button halfway down the live
image will be frozen: .
The frozen image can initially be "checked"
-
on the display or viewfinder.
If the image is not to be saved, push the
-
button: .
Pushing the button halfway down again
-
in mode is ignored.
Push the button completely the image is
•
saved.
The process of writing the data is indicated by the
changing color of the map symbol (in the line below the
image, right-hand side):
camera control automatically re-activates the Live mode:
.
2-12
. Upon saving, the
Quick Saving
Using the thermal imager, you can immediately save
images in the Live mode or directly from the motion:
•
Immediately push the button completely
image is saved immediately:
camera control then automatically re-activates
the Live mode: .
Deviating from the factory setting described in
Table 2-3, the button can be used to trigger
further functions such as shutter activation,
autofocus, visible light image-LED, laser
distance meter/laser pointer before saving the
image.
, the
Note