Icom IC-F5012 Service Manual page 5

• Receive system
• Intermediate frequencies
• Sensitivity
• Squelch sensitivity (At threshold)
• Adjacent channel
selectivity
• Spurious response
• Intermodulation
• FM hum and noise
(Without CCITT filter)
• Residual modulation
(With CCITT filter)
• Audio output power
• Audio output impedance
Measurements made in accordance with TIA-603 ([USA], [EXP]) or EN 300 086 ([EUR]).
All stated specifi cations are subject to change without notice or obligation.
[USA], [EXP]
0.25 μV typ. at 12 dB SINAD
0.25 μV typ.
Wide
Middle
Narrow
More than 70 dB (75 dB typ.)
Wide More than 40 dB (45 dB typ.)
Narrow More than 34 dB (40 dB typ.)
Wide
Middle
Narrow
Double-conversion superheterodyne
1st IF; 46.35 MHz, 2nd IF; 450 kHz
More than 70 dB (75 dB typ.)
−
More than 60 dB (65 dB typ.)
70 dB min.
–
–
–
4.0 W typ. at 5% distortion with a 4 Ω load
4 Ω
1 - 2
[EUR]
−4 dBμV (EMF) typ. at 20 dB SINAD
−4 dBμV (EMF) typ.
More than 70 dB (75 dB typ.)
More than 65 dB (67 dB typ.)
–
–
More than 45 dB (55 dB typ.)
More than 43 dB (53 dB typ.)
More than 40 dB (50 dB typ.)