HP 255 G6 Maintenance And Service Manual page 72

5. Separate the display from the computer (6).
If it is necessary to replace any of the display assembly subcomponents:
1. To remove the display bezel:
a. Flex the inside of the top edge (1), the left and right edges (2), and the bottom edge (3) of the
display bezel until the bezel disengages from the display enclosure.
NOTE:
Mylar from the bottom of the display panel.
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
When removing the bezel from the bottom of the display (3), be careful not to peel the