Error Messages - Excell ZSME300000240 User Manual

EXCELL PRECISION CO., LTD.
Low Power Alarm
Please note when the (
display, the batteries should be recharged.
The scale will turn off automatically after a few hours when the low battery warning symbol
shows up. The scale must be fully recharged, before operating again.
Please recharge at once when the symbol
accuracy.

1-5 Error Messages

⇒ Weight exceed 9d of maximum capacity. (d=division)
⇒ Zero value after power on is over +10% FS.
⇒ Zero value after power on is less than -10% FS.
⇒ Unstable zero return, unstable over 10 sec. Press
⇒ Zero is too high when calibrating. (over internal value350,000)
⇒ Zero is too low when calibrating. (under internal value 80,000)
-----
⇒If there is no Tare or Pre-tare, the weight is less than -20d.
02018058
) symbol keeps flashing on the left down corner of the
shows in order to keep the weight
6
to leave E4.
ZSME300000240