Wyseworks; Introducing Wyseworks; Basic Wyseworks Controls - Wyse WY-60 User Manual

INTRODUCING WYSEWORKS
BASIC WYSEWORKS
CONTROLS
WyseWorks
WyseWorks is a set of four desktop accessories:
• A calculator with a paper tape feature that displays and prints
the results of your calculations
• An alarm clock with two alarm settings and reminder messages
• A calendar that displays three months at a glance
• An ASCII table displaying numerical equivalents and monitor
mode symbols for 128 U.S. ASCII characters
You have access to these accessories at any time except when
the terminal is in setup mode. They are displayed on the top
eight lines of the screen, which temporarily defaults to 80
columns. (Overlaid data and the previous screen width are
restored when you exit WyseWorks.)
Press @illl Caps
Lock
I
to display the WyseWorks entry screen,
where the fields at the bottom of the screen display the name of
each accessory. Follow these steps:
1 To select an accessory, press the indicated function key. The
accessory will appear in the box at the top of the screen.
2 After you've selected an accessory, follow the instructions on
the screen, referring to the explanations in this chapter.
3 When you're ready to leave an accessory,
- Press
I
Ctrlll Caps
Lock
I
to exit WyseWorks
- Press
ITIQ]
to return to the entry screen to select another
accessory