Samsung VP-L900 Training Manual page 32

USB interface (VP-L907 only)
4. The window below displays the folder to install the program.
The program is installed in the following folder.
C:\Programfiles\Samsung\USB Media 2.0
Click
5. Connect the camcorder to PC.
6. PC finds the new hardware and installs the driver automatically.
7. If the driver is installed, the installation is completed.
8. Execute USB Media 2.0 player on the Windows wall paper.
Note:
USB Media 2.0 User's Manual is included on the accompanying CD in Adobe's Portable Document Format (PDF).
The user's manual can be viewed using Acrobat Reader software, which is also included on the CD.
(The Acrobat Reader is a freeware product of Adobe Systems, Inc.)
ENGLISH
USB interface (VP-L907 only)
Connecting to a PC
1. Connect a USB cable to the USB port on the PC.
2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack)
3. Connect the audio cable to the Line input jack of the PC.
If the PC has no Line input jack, connect the audio cable to the MIC input jack.
This connection, however, may produce noise depending on the PC.
Notes:
If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop
and the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other
USB devices, the camcorder may not work properly.
- If this occurs, remove the other USB devices from the PC and reconnect the camcorder.
62
Samsung Electronics
to change the folder.
4.
6.
USB Cable
MIC
USB AUDIO Cable
Operating Instructions
ENGLISH
61
3-27