Table of Contents
Advertisement
Problem
Camera will not
take photos
Photos are blurry
Cannot transfer
photos to the
computer
Product functions
erratically or does
not function at all
Troubleshooting
Cause
Batteries are weak or
exhausted
Camera is turned off
Camera memory is full of
images (
appears on
the LCD screen)
Lens may be dirty
or smudged
Camera moved when
picture was taken
You are too close to
your subject
USB cord may not be
properly connected
Static electricity may
temporarily stop the
electronic function of
the camera and cause
picture loss. For example,
walking across the rug and
touching the camera may
create static electricity.
Batteries are weak
or exhausted
Camera is too cold (left
out or used in freezing
temperatures)
Solution
Replace the batteries in the
camera with four, new AAA (LR03)
alkaline batteries.
Press the power button on the back of
the camera to turn it on.
Download pictures to your computer
or use the image delete button on the
camera to remove some of them.
Clean the lens with a soft cloth.
Try to keep the camera steady when
you take pictures.
The focus range is from about
1,2 m – infinity
Check cord connections on both your
camera and your computer.
Reset the electronics by opening and
closing the battery compartment door.
Replace the worn batteries with four,
new AAA (LR03) alkaline batteries.
Normal function will return once
camera warms up.
24
Advertisement
Table of Contents
