Canon iR C6800 Series Service Manual page 1373

6) When the machine has made a connection and brings up the following screen, click [OK].
Service Support Tool DLM4 (ver.1.81En) Connecting to the Machine
Selected Model and Unit
Model
Connected Model and Unit
Model
List of System Software for the Target of Connection
DCON List for the Target of Connection
The information needed for the job has been obtained.
Check the indicated descriptions, and press [OK].
7) Click [DCON Download].
Service Support Tool DLM4 (ver.1.81En) Selecting a Job
Connected Model and Unit
Model
List of System Software for the Target of Connection
DCON List for the Target of Connection
Selecting a DCON Job
Click the job key for DCON
Write the DCON to the machine.
iR XXXX Unit
iR XXXX Unit
L a n g u a g e C o u n t r y / R e g i o n
J a p a n e s e J a p a n
L a n g u a g e C o u n t r y / R e g i o n
C o m m o n A l l
iR XXXX Unit
L a n g u a g e C o u n t r y / R e g i o n
J a p a n e s e J a p a n
L a n g u a g e C o u n t r y / R e g i o n
C o m m o n A l l
Connected to 172.16.1.100
DCON
DCON
V e r s i o n S t a t e
0 1 . 2 5 A
V e r s i o n S t a t e
0 1 . 2 6 A
OK
F-16-93
Connected to 172.16.1.100
DCON
V e r s i o n S t a t e
0 1 . 2 5 A
V e r s i o n S t a t e
0 1 . 2 6 A
DCON Download
To Unit Selection Screen
F-16-94
Chapter 16
16-67