Canon iR C6800 Series Service Manual page 1366

Chapter 16
6) When the machine has made a connection and brings up the following screen, click [OK].
Service Support Tool DLM4 (ver.1.81En) Connecting to the Machine
Selected Model and Unit
Model
Connected Model and Unit
Model
List of System Software for the Target of Connection
BootROM of the Target of Connection
The information needed for the job has been obtained.
Check the indicated descriptions, and press [OK].
7) Click [BootROM Download].
Service Support Tool DLM4 (ver.1.81En) Selecting a Job
Connected Model and Unit
Model
List of System Software for the Target of Connection
BootROM of the Target of Connection
Selecting a BootROM Job
Click the job key for BootROM.
Write the boot program to the
machine.
16-60
iR XXXX Unit
iR XXXX Unit
L a n g u a g e C o u n t r y / R e g i o n
J a p a n e s e J a p a n
L a n g u a g e C o u n t r y / R e . . .
C o m m o n A l l
iR XXXX Unit
L a n g u a g e C o u n t r y / R e g i o n
J a p a n e s e J a p a n
L a n g u a g e C o u n t r y / R e . . .
C o m m o n A l l
Connected to 172.16.1.100
Boot
Boot
V e r s i o n S t a t e
0 1 . 2 5 A
V e r s i o n
03.01
OK
F-16-81
Connected to 172.16.1.100
Boot
V e r s i o n S t a t e
0 1 . 2 5 A
V e r s i o n
03.01
BootROM Download
To Unit Selection Screen
F-16-82