Turn The Camera On - Nikon coolpix A900 Reference Manual

Camera Setup
Setup from a Smartphone or Tablet
Before proceeding, install the SnapBridge app (Aii) and enable
Bluetooth and Wi-Fi on your smartphone or tablet (below, "smart
device").
The camera and smart device screens shown in this manual may
differ from those of the actual products.
1

Turn the camera on.

Use the multi selector to select and adjust settings.
Multi selector
k button
(apply selection)
A language selection dialog will be displayed. Press
H or I on the multi selector to highlight a
language and press the k button to select.
The language can be changed at any time using
the Language option in the setup menu.
The power switch is enabled a few seconds after
the battery is inserted. Wait a few seconds before
pressing the power switch.
2
Press the k button when the dialog at
right is displayed.
If you do not wish to use a smart device to
configure the camera, press the d button
(A9).
Up
Left
Down
Right
Use SnapBridge to send photos to your
smart device and share them online.
To skip this screen and set SnapBridge
later from the Network menu, press
MENU.
Preparing for Shooting
Power
switch
Language
Български
Čeština
Dansk
Deutsch
English
Español
Cancel
Later Set
7