Camera Setup; Turn The Camera On - Nikon COOLPIX B500 Quick Start Quide

Camera Setup

Remove the lens cap before turning on the camera.
Setup from a Smartphone or Tablet
Before proceeding, install the SnapBridge app (Aii) and enable
Bluetooth and Wi-Fi on your smartphone or tablet (below, "smart
device").
The camera and smart device screens shown in this manual may
differ from those of the actual products.
1

Turn the camera on.

Use the multi selector to select and adjust settings.
Multi selector
k button
(apply selection)
A language selection dialog will be displayed. Press
H or I on the multi selector to highlight a
language and press k to select.
The language can be changed at any time using
the Language option in the setup menu (A20).
2
Press k when the dialog at right is
displayed.
If you do not wish to use a smart device to
configure the camera, press d (A8).
6
Getting Started
Up
Left
Down
Right
Power switch
Language
Use SnapBridge to send photos to your
smart device and share them online.
To skip this screen and set SnapBridge
later from the Network menu, press
MENU.
Later Later
Cancel
Set