Turn The Camera On - Nikon COOLPIX P600 Quick Start Manual

3
.3 Disconnect the charging AC adapter from the electrical outlet
and then disconnect the USB cable.
C
Turning On the Camera While the Battery is Charging
The camera does not turn on while the charging AC adapter is connected to
it even when you press the power switch. Press and hold the c (playback)
button to turn on the camera in playback mode and play back images.
Shooting is not possible.
4

Turn the Camera On

Step
4
.1 Open the monitor and remove the lens cap.
See "Opening and Adjusting the Angle of the Monitor" (A5) for
more information.
See "Attaching the Camera Strap and Lens Cap" (A6) for more
information.
4
.2 Press the power switch.
The monitor turns on.
To turn the camera off, press the
power switch again.
C
The Auto Off Function
If no operations are performed for a while, the monitor will turn off, the
camera will enter standby mode, and the power-on lamp will flash. If no
operations are performed for another 3 minutes, the camera will turn off
automatically.
The time that elapses before the camera enters standby mode is about 1
minute. The time can be changed using the Auto off setting in the setup
menu (A30).
11
First Steps