[Emulate] - Panasonic PT-VZ580 Operating Instructions (Functional Manual)

5) Press as to select [TIMER].
6) Press qw to switch the time to be set.
f The set time is switched each time you press the button.
f You can set the time until the luminous lamp turns off with the power management function from 5 minutes
to 120 minutes in increments of 5 minutes.
Setting [STANDBY MODE]
Set the power consumption during standby.
1) Press as to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
f The [ECO MANAGEMENT] screen is displayed.
3) Press as to select [STANDBY MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[ECO]
Note
f When [STANDBY MODE] is set to [NORMAL], the network function can be used during standby.
f When [STANDBY MODE] is set to [ECO], the network function and audio output function cannot be used during standby. Also, some
RS-232C commands cannot be used.
f When set to [ECO], it may take approx. 10 seconds longer before the projector starts projecting after the power is turned on, compared with
when set to [NORMAL].
f When set to [NORMAL], it may take approx. 1 minute to enable the network function after connecting the power cord.
f The setting of [STANDBY MODE] cannot be returned to the factory default even if the [PROJECTOR SETUP] menu → [INITIALIZE ALL] (
page 82) is executed.

[EMULATE]

When controlling the projector on a computer via the <SERIAL IN> terminal, set use of control commands on a
previously purchased Panasonic projector. This allows the control software for an existing Panasonic projector to
be inherited and used.
1) Press as to select [EMULATE].
2) Press the <ENTER> button.
f The [EMULATE] screen is displayed.
3) Press as to select the desired item.
[DEFAULT]
[D3500]
[D4000]
[D/W5k SERIES]
[D/W/Z6k SERIES]
[L730 SERIES]
[L780 SERIES]
[L735 SERIES]
[L785 SERIES]
[F/W SERIES]
78 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Select this item to use the network function during standby.
Select this item to reduce power consumption during standby.
VZ585N series, VW545N series, VX615N series, VZ580 series, VW540 series, VX610 series,
VZ575N series, VW535N series, VX605N series, VZ570 series, VW530 series, VX600 series, VX60,
VX50, EZ590 series, EZ57, EW650 series, EW550 series, EX620 series, EX520 series, FZ570
series, FW530 series, FX500 series, RZ570 series, VW355N series, VX425N series, VW350 series,
VX420 series, EZ580 series, EW640 series, EX610 series, EW540 series, EX510 series, VW345N
series, VX415N series, VW340Z, VX410Z, VX42Z, VX406EA, VX46EA, EZ770 series, EW730 series,
EX800 series, RZ475 series, RZ470 series, RW430 series, RZ370 series, RW330 series
D3500 series
D4000 series
D5700 series, DW5100 series, D5600 series, DW5000 series, D5500 series
DZ870 series, DW830 series, DX100 series, DZ780 series, DW750 series, DX820 series, DZ770
series, DW740 series, DX810 series, DZ680 series, DW640 series, DX610 series, DW730 series,
DX800 series, DZ6710 series, DZ6700 series, DW6300 series, D6000 series, D5000 series, DZ570
series, DW530 series, DX500 series, RZ970 series, RW930 series, RX110 series, RZ770 series,
RZ660 series, RW730 series, RW620 series, RZ670 series, RW630 series, RZ575 series, RZ570
series
L730 series, L720 series, L520 series
L780 series, L750 series
L735 series
L785 series
FW430 series, FX400 series, FW300 series, F300 series, F200 series, FW100 series, F100 series
Æ