[Tint]; [Sharpness]; [Color Temperature] - Panasonic PT-VZ580 Operating Instructions (Functional Manual)

2) Press qw or the <ENTER> button.
f The [COLOR] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation
Press the w button.
Press the q button.

[TINT]

(Only for movie-based signal input except PAL / PAL-M / PAL-N / PAL60 / SECAM)
You can adjust the skin tone in the projected image.
1) Press as to select [TINT].
2) Press qw or the <ENTER> button.
f The [TINT] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation
Press the w button.
Press the q button.

[SHARPNESS]

You can adjust the sharpness of the projected image.
1) Press as to select [SHARPNESS].
2) Press qw or the <ENTER> button.
f The [SHARPNESS] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation
Press the w button.
Press the q button.
Note
f [SHARPNESS] will be invalid when [DAYLIGHT VIEW] is set to [AUTO] or [ON].

[COLOR TEMPERATURE]

You can switch the color temperature if the white areas of the projected image are bluish or reddish.
1) Press as to select [COLOR TEMPERATURE].
2) Press qw or the <ENTER> button.
f The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[HIGH]
[LOW]
Note
f When the [DISPLAY OPTION] menu
[DEFAULT].
Chapter 4 Settings - [PICTURE] menu
Adjustment
Deepens colors.
Weakens colors.
Adjustment
Adjusts skin tone toward greenish color.
Adjusts skin tone toward reddish purple.
Adjustment
Contours become sharper.
Contours become softer.
Factory default setting.
Becomes a bluish image. Select this when the white areas of the projected image are reddish.
Becomes a reddish image. Select this when the white areas of the projected image are bluish.
[COLOR ADJUSTMENT] is set to other than [OFF], [COLOR TEMPERATURE] is fixed to
→
Adjustment range
-32 ~ +32
Adjustment range
-32 ~ +32
Adjustment range
0 ~ +15
ENGLISH - 55