Rear Panel - Janome MS5027PR Service Manual

REAR PANEL

PRESSER FOOT LEVER
(TO REMOVE)
1. OPEN THE FACE COVER.
2. REMOVE THE TOP COVER UNIT (SEE PAGE 7), THE BELT COVER (SEE PAGE 9) AND THE FRONT
COVER (SEE PAGE 10).
3. REMOVE THE SETSCREWS (A), (B), AND (C), AND LOOSEN THE SETSCREWS (D), (E) AND (F).
4. LOWER THE PRESSER FOOT LEVER, AND PULL AWAY THE REAR PANEL UNIT FROM THE
MACHINE FRAME. TWIST AND REMOVE THE ARM COVER PART FROM THE PRESSER FOOT
LEVER.
(TO ATTACH)
5. WHEN YOU REATTACH THE REAR PANEL, PUT THE "WINDOW" ON THE PLASTIC PANEL OVER
THE PRESSER FOOT LEVER, AND THEN REPLACE THE SIX SCREWS.
SERVICE ACCESS
(C)
(D)
(E)
(F)
TWIST AND REMOVE THE ARM COVER
PART FROM THE PRESSER FOOT LEVER.
11
(A)
(B)
REAR PANEL UNIT
MS5027PR