Buttonhole Function (2) - Janome MS5027PR Service Manual

MS5027PR

BUTTONHOLE FUNCTION (2)

* IF THE BAR TACK ON THE BUTTONHOLE OCCURS TOO EARLY, OR IF NO BAR TACK IS SEWN
AT ALL, ADJUST AS FOLLOWS.
ADJUSTMENT PROCEDURE:
1. REMOVE THE BELT COVER (SEE PAGE 9).
2. (A) IF THE BAR TACK IS SEWN TOO EARLY, TURN THE HEXAGONAL SOCKET SCREW (E) IN
DIRECTION (C).
(B) IF THE BAR TACK IS SEWN TOO LATE, TURN THE HEXAGONAL SOCKET SCREW (E) IN
DIRECTION (D).
3. ATTACH THE BELT COVER.
MECHANICAL ADJUSTMENT
(A)
BAR TACK IS SEWN
TOO EARLY
HEXAGONAL SOCKET
SCREW (E)
(B)
BAR TACK IS SEWN
TOO LATE
(C)
(D)
34