Initial Startup Via The Serial Interface - Siemens HiPath HG 1500 Service Manual

lan2de.c03
Startup
Initial startup of HiPath HG 1500

3.1.2 Initial startup via the serial interface

Note
The serial interface should only be used for initial startup if this is not possible via a
LAN port.
Prerequisite
The SLIP connection in the dial-up network must be installed in accordance with the
operating system.
Step
1. Connect the serial interface cable (S30122-X5468-X).
2. Install Assistant HiPath HG 1500.
3. Configure the IP address (1.0.0.2) of the PC (SLIP)
4. From the DOS command window, ping the HiPath HG 1500
(IP 10.144.233.63).
5. Generate an empty customer database and load to HiPath HG 1500.
6. Save and administer customer data.
3-2
Task
A31003-K5020-S100-4-7620
For internal use only
Service Manual