1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Offroad Vehicle
  5. hicom 150 H optiset E standard
  6. Service manual

Siemens Hicom 150 H Service Manual

Hide thumbs Also See for Hicom 150 H:
Table of Contents

Advertisement

Quick Links

Download this manual
Hicom 150 H
HiPath HG 1500
V 2.0
Service Manual

Advertisement

Table of Contents
loading

Related Manuals for Siemens Hicom 150 H

Summary of Contents for Siemens Hicom 150 H

  • Page 1 Hicom 150 H HiPath HG 1500 V 2.0 Service Manual...
  • Page 2 *1PA31003-K5020-S100-6-7620* 1P A31003-K5020-S100-6-7620 © Siemens AG 2001 Information and Communication Networks, Hofmannstraße 51, D-81359 München ● Reference no.: A31003-K5020-S100-6-7620 Printed in the Federal Republic of Germany. ● Subject to availability. Right of modification reserved.
  • Page 3 Introduction Installation Hicom 150 H HiPath HG 1500 Startup V 2.0 Administration Service Manual Additional information A31003-K5020-S100-6-7620...

  • Page 4: Table Of Contents

    lan2detoc.fm Contents For internal use only Contents 1 Introduction ............1 1.1 HiPath HG 1500 .
  • Page 5 lan2detoc.fm Contents For internal use only 5.1.2 Bus topology (10 Base2) ..........5-1 5.2 SW upgrade .
  • Page 6 lan2delof.fm Figures For internal use only Figures Figure 2-1 HXGS interfaces (S30810-Q2931-X/X100)......2-3 Figure 2-2 HXGS2 interfaces with 2nd LAN (S30810-Q2939-X000/X100) ..2-3 Figure 2-3 HXGM interfaces (S30810-Q2930/Q2940-X/X100) .
  • Page 7 lan2delof.fm Figures For internal use only A31003-K5020-S100-6-7620 Service Manual...
  • Page 8 lan2delot.fm Tables For internal use only Tables Table 1-1 Starting Hicom system administration (Service) ....1-4 Table 2-1 HXGS application option/slot........2-1 Table 2-2 HXGS hardware variants.
  • Page 9 lan2delot.fm Tables For internal use only A31003-K5020-S100-6-7620 Service Manual...

  • Page 10: Introduction

    Hicom Xpress @LAN and HiPath HG 1500 create a bridge between the LAN and the ISDN network via an integrated HXGS/HXGM board Suitable for: Hicom 150 E Office Version 2.2 and later or Hicom 150 H V 1.0 or later, Office- ● Point/OfficeCom/OfficePro model The following implementation scenarios are possible: Voice gateway between LAN (H.323) and standard telephones (e.g.

  • Page 11: Prerequisite

    (voice, fax, file transfer, etc.). 1.2 Short description HiPath HG 1500 is an expansion card for Hicom 150 E Office/Hicom 150 H Point/ Com/Pro. It is used to connect a "local" LAN to Hicom systems and to link "external"...

  • Page 12: Service Information

    The unique worldwide Ethernet address (MAC address) is a factory default and can- not be modified. Card recognition is performed automatically in Hicom 150 E Office/Hicom 150 H, Point/Com/Pro. HiPath HG 1500 is installed as an individual board type in Hicom 150 E Office/Hicom 150 H, Point/Com/Pro.

  • Page 13: Hicom Password Concept

    31994 User: 31994 (default) 31994 Password: 31994 (default) ✓ Change user and/or password Confirm user and/or password Further information is contained in the Hicom 150 E Office Rel. 2.0-3.0 Service Man- ual or Hicom 150 H V1.0. A31003-K5020-S100-6-7620 Service Manual...

  • Page 14: Functional Environment Of Hipath Hg 1500

    ISDN. 1.5.2.2 Trunk access/toll restriction Trunk access is configured in Hicom 150 H/HiPath HG 1500Point/Com/Pro for call numbers used by Hicom 150 E Office. Hicom toll restriction for outgoing seizure is performed based on this trunk access in the same way as for outgoing calls.
  • Page 15 lan2de.c01 Introduction For internal use only If no gateways or multiconference units are being used, IP telephony can also be > implemented in H.323 networks without gatekeepers. Note, however, that the con- nection can only be set up via the IP address in this case, so no authorizations and bandwidth control are possible.

  • Page 16: Installation

    2.1.1 HXGS Introduction The HiPath HG 1500 board HXGS connects Hicom 150 E Office/Hicom 150 H Office- Com/OfficePoint with the LAN environment. The board supports up to 16 B channels. The following board variants are available:...
  • Page 17 lan2de.c02 Installation For internal use only HiPath HG 1500 boards Table 2-1 HXGS application option/slot Possible application Boards Slot * = 2 boards may be operated in parallel OfficeCom, old HW, CBFC: S30810-Q2950-X OfficeCom, new HW, CBPC: S30810-Q2932-A201 Table 2-2 HXGS hardware variants System type Services...
  • Page 18 lan2de.c02 Installation For internal use only HiPath HG 1500 boards HXGS V.24 connec- tion CUC/ 10/100 Base-T Figure 2-1 HXGS interfaces (S30810-Q2931-X/X100) HXGS2 with 2nd LAN interface V.24 10 Base-T (trunk) connec- tions CUC/ 10/100 Base-T (station) Figure 2-2 HXGS2 interfaces with 2nd LAN (S30810-Q2939-X000/X100) A twisted-pair cable is used as the transmission medium for 10/100 Base-T and 10 Base-T.

  • Page 19: Hxgs V.24 Interface

    lan2de.c02 Installation For internal use only HiPath HG 1500 boards The cable is connected to the HiPath HG 1500 HXGS/HXGS2 (OfficeCom and Offi- cePoint) via the 8-pin Western socket (X3) located on the MDF side of the circuit board, see Figure 2-1, or X3 and X4, see Figure...

  • Page 20: Table 2-4 Hxgs V.24 Interface

    lan2de.c02 Installation For internal use only HiPath HG 1500 boards Table 2-4 HXGS V.24 interface Pin Signal I/O Function O Transmit Data Clear to Send Receive Data O Request to Send A31003-K5020-S100-6-7620 Service Manual...

  • Page 21: Hxgm

    HiPath HG 1500 boards 2.1.2 HXGM Introduction The HiPath HG 1500 board HXGM connects the Hicom 150 H OfficePro with the LAN environment. The board supports up to 16 B channels. The following board variants are available: HiPath HG 1500 HXGM Voice and Data (S30810-Q2930-X)
  • Page 22 lan2de.c02 Installation For internal use only HiPath HG 1500 boards Interfaces/connectors X10: 6-pin shielded MiniDin socket for V.24 cable; see Section 2.1.2.1 ● The board is connected to the system via the backplane. An adapter for the back- ● plane (part number C39228-A7195-A10, US backplane: C39195-Z7404-A10) is used to connect the LAN with an RJ45 connector, see Figure 2-4.

  • Page 23: Table 2-7 Rj45 Socket Assignment (Hxgm)

    lan2de.c02 Installation For internal use only HiPath HG 1500 boards Metal housing RJ45 socket 1SU-SIPAC connector Figure 2-4 Adapter for HXGM backplane Table 2-7 RJ45 socket assignment (HXGM) Pin Signal I/O Function Transmit Data + Transmit Data - Receive Data + (TT1) Transmit Termination 1 (TT2)
  • Page 24 lan2de.c02 Installation For internal use only HiPath HG 1500 boards Table 2-8 Assignment of the SIPAC-RJ45 LAN adapter SIPAC connec- RJ45 socket Signal LAN adapter cable (U.S. only) Contact is established between the LAN and RJ45 via a CHAMP adapter cable. The adapter is connected to the CHAMP socket on the rear of the backplane which is assigned to the HG 1500 slot.

  • Page 25: Table 2-9 Assignment Of The Champ-Rj45 Lan Adapter Cable

    lan2de.c02 Installation For internal use only HiPath HG 1500 boards Table 2-9 Assignment of the CHAMP-RJ45 LAN adapter cable CHAMP con- RJ45 socket Signal Ethernet nector LAN #2 LAN #1 25, 50 Housing Shield Table 2-10 HXGM LED concept H1 - red H2 - green Meaning Flashing...

  • Page 26: Hxgm V.24 Interface

    lan2de.c02 Installation For internal use only HiPath HG 1500 boards Table 2-11 Contact assignment of the HXGM LAN interfaces X9 (LAN1) X8 (LAN 2) Function 10/100 Base-T 10 Base-T Transmit: + wire Transmit: - wire Receive: + wire Receive: - wire 4+5+7+8 4+5+7+8 not used...

  • Page 27: Interfaces To The Lan

    lan2de.c02 Installation For internal use only HiPath HG 1500 boards Table 2-12 V.24 socket assignment (HXGM2) Signal Function Note A SLIP connection is required for Assistant administration of Xpress @LAN/HG 1500. However, a SLIP connection is not possible for the Loader. 2.1.3 Interfaces to the LAN The physical configuration of the LAN interface is predefined by the IEEE 802 stan- dard.

  • Page 28: Part Numbers

    lan2de.c02 Installation For internal use only HiPath HG 1500 boards 2.2 Part numbers Part number OfficePoint OfficeCom OfficePro HXGM Data only S30810-Q2930-X100 HXGM Voice and Data S30810-Q2930-X HXGM2 Data only S30810-Q2940-X100 HXGM2 Voice and Data S30810-Q2940-X000 HXGS Data only S30810-Q2931-X100 S30810-Q2931-X100 -- HXGS Voice and Data S30810-Q2931-X S30810-Q2931-X...

  • Page 29: Hipath Hg 1500 Installation

    STLS 2/4 MSI lines TLA 2/4/8 TS 2 HiPath HG 1500 Table 2-13 Slots Maximum system configurations for Hicom 150 E OfficePro are contained in the Hi- com 150 E Office/Hicom 150 H Service Manual. A31003-K5020-S100-6-7620 2-14 Service Manual...

  • Page 30: Installation Procedure

    lan2de.c02 Installation For internal use only HiPath HG 1500 boards 2.3.3 Installation procedure Step Task Remove the power plug. Insert the board. Insert the power plug. Table 2-14 Installation procedure in the case of OfficePoint/Com This sequence must be observed in order to guarantee successful LAN board login. Note In the case of Hicom 150 E/H OfficePro, the board can be plugged and unplugged without disconnecting the power supply.
  • Page 31 lan2de.c02 Installation For internal use only HiPath HG 1500 boards A31003-K5020-S100-6-7620 2-16 Service Manual...

  • Page 32: Startup

    lan2de.c03 Startup For internal use only Initial startup of HiPath HG 1500 3 Startup 3.1 Initial startup of HiPath HG 1500 Note Windows 3.11 is no longer supported. 3.1.1 Initial startup: Remote via modem Prerequisites The feature is only available as of Hicom Rel. 3 SMR-E with Assistant Office P30300- P1584-A1-02 and SMR-11 HG1500.

  • Page 33: Startup Via Arp

    lan2de.c03 Startup For internal use only Initial startup of HiPath HG 1500 Step Task HiPath HG 1500 can now be administered remotely with Assistant Xpress @LAN/HG 1500. Note The CHAP user ID and password are identical to the first user name and password of the Hicom user group system administration (generally 31994/31994).

  • Page 34: Initial Startup Via The Serial Interface

    lan2de.c03 Startup For internal use only Initial startup of HiPath HG 1500 3.1.3 Initial startup via the serial interface Note The serial interface should only be used for initial startup if this is not possible via a LAN port. Prerequisite The SLIP connection in the dial-up network must be installed separately from the op- erating system.

  • Page 35: Configuration For Gatekeeper Mode

    lan2de.c03 Startup For internal use only Initial startup of HiPath HG 1500 3.2 Configuration for gatekeeper mode Figure 3-1 Installation for gatekeeper mode Group 1 HFA client H.323 client Optiset 100 HXGM/HXGS Group 2 HiPath HG 1500 H.323 GK LP5100 Administration Hicom 150 E Office The following stations must be differentiated from the user’s viewpoint:...

  • Page 36: Configuration Hipath Hg 1500

    lan2de.c03 Startup For internal use only Initial startup of HiPath HG 1500 3.2.1 Configuration HiPath HG 1500 Step Task Under Voice Clients -> Gatekeeper: Enter the IP address of the PC with the gatekeeper, enable gatekeeper support and configure the prefix. Under Voice Clients ->...
  • Page 37 lan2de.c03 Startup For internal use only Initial startup of HiPath HG 1500 Configuring Services Step Task Press the Services button and then click Add. Under Description, enter a description for the service, e.g. "Hicom 150 E". Under Prefix, enter the correct code, which must match the HiPath HG 1500 gateway prefix set up in the HLB0, e.g.

  • Page 38: Administration

    lan2de.c04 Administration For internal use only Tracing with development trace 4 Administration Information on status diagnostics for HiPath HG 1500 such as DSS, PPP , Firewall, HFA client, H.323, vCAPI, etc. is contained in the HiPath HG 1500 Administrator Manual under Customer trace. 4.1 Tracing with development trace Development trace must be deactivated when HiPath HG 1500 is in operation.
  • Page 39 lan2de.c04 Administration For internal use only Tracing with development trace A31003-K5020-S100-6-7620 Service Manual...

  • Page 40: Additional Information

    BaseT-Ethernet). A standard hub emulates a bus internally. If a cable malfunctions, only one terminal is affected. The integrated HiPath HG 1500 can be connected di- rectly. Hicom 150 E Office Hicom 150 H Figure 5-1 10/100 BaseT cabling Notes 10/100 MBit/s Autosense ●...
  • Page 41 (star) cabling is becoming increas- ingly popular. The integrated HiPath HG 1500 can only be connected via a hub or switch. Hicom 150 E Office Hicom 150 H Figure 5-2 10 Base2 cabling Note The coaxial cable must have terminating resistors at both ends.
  • Page 42 lan2de.c05 Additional information For internal use only Firmware Download 5.2 SW upgrade Upgrading from HiPath HG 1500 is performed via APS transfer. 5.3 Firmware Download Firmware Download is only available at the developer level of the Assistant. This fea- ture is used to upgrade the firmware of a board to a new version. Such a firmware upgrade should only be performed if there are valid reasons (since the operation is comparable to a BIOS update on the PC) Select the APS file with the firmware to be transferred (File Open dialog)
  • Page 43 lan2de.c05 Additional information For internal use only Firmware Download If a firmware transfer is supported, Assistant I indicates the software version of ● HiPath HG 1500 as well as the firmware versions which are currently available in the HiPath HG 1500 system and are contained in the APS file. This is followed by a warning message.
  • Page 44 lan2de.abb For internal use only Abbreviations This list contains the abbreviations used in this manual. Abbreviation Definition Application Programming System Address Resolution Protocol CAPI Common ISDN Application Programming Interface CHAP Challenge Handshake Authentication Protocol Cordless Multicell Integration CSTA Computer Supported Telecommunications Applications Computer Telephony Integration DFÜ...
  • Page 45 lan2de.abb For internal use only Media Access Control MODEM Modulator/Demodulator Multiple Subscriber Number Network Address Translation a/b telephone (analog telephone) Password Authentication Protocol PING Packet Internet Groper Point-to-Point Protocol RARP Reverse Address Resolution Protocol Remote Access Service Serial Interface Cable Subscriber Line Analog (Hicom board) SLIP Serial Line Interface Protocol...
  • Page 46 lan2deix.fm Index For internal use only Index Adapter for HXGM backplane 2-8 Administration 4-1 Assignment of the SIPAC-RJ45 LAN adapter 2-9 Bus topology (10 Base2) 5-1 Configure HiPath HG 1500 3-5 Configuring the NGK 100 gatekeeper 3-5 Contact assignment of the HXGM LAN interfaces 2-11 Determining the firmware version of the board 4-1 Firmware Download 5-3 Gatekeeper 1-5...
  • Page 47 lan2deix.fm Index For internal use only Installation requirements 2-14 Integrating various network topologies 5-1 Interface LAN 2-12 Least Cost Routing (LCR) 1-5 Part numbers 2-13 RJ45 socket assignment (HXGM) 2-8 Service information 1-3 Short description 1-2 Slot 2-14 Star topology with hub (10/100 BaseT) 5-1 Starting Hicom system administration (Service) 1-4 Startup 3-1 Startup via ARP 3-2...

This manual is also suitable for:

Hipath hg 1500

Table of Contents