Irm Dsp Mode Select - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[867] IRM DSP MODE SELECT

This MMC can assign IRM CH mode. IRM D-Board Channels can be operated one mode
of DTMFR, R2MFC, CID.
If there is not IRM Board, displays 'NO IRM'.
This option may not be available in certain OfficeServ models.
OfficeServ7400
CONDITION
IRM board must be equiped in LP40.
DEFAULT DATA
CH01-16:DTMFR
ACTION
1) Press Transfer button and enter 867.
Display shows:
2) Dial the cabinet number. (1-3)
OR
Press Volume button to select and press Right Soft
button to move cursor.
3) Dial the LOC number. (1-2)
OR
Press Volume button to select and press Right Soft
button to move cursor.
4) Dial the DSP number. (1-2)
OR
Press Volume button to select and press Right Soft
button to move cursor.
2-438
Type Option
C:1-LOC:1-CH:01
DTMFR (DTMFR)
DISPLAY
C:1-LOC:1-CH:01
DTMFR DTMFR
C:1-LOC:1-CH:01
DTMFR DTMFR
C:1-LOC:1-CH:01
DTMFR DTMFR
C:1-LOC:1-CH:01
DTMFR DTMFR
© SAMSUNG Electronics Co., Ltd.