Nokia RH-64 Service Manual page 62

Nokia Customer Care
ii For FPS-8 Flash Prommer, choose the following connection settings:
• Media: FPS-8
• Port Num: COM Port where FPS-8 is connected
• COMBOX_DEF_MEDIA: FBUS
5. Click Finish to complete the configuration.
6. Activate the connection you want to use by clicking it, use up/down arrows to move it on top of the list, and
click Apply.
The connection is now selected and can be used after closing the Manage Connections window.
Selected connection will be shown on the right hand bottom corner of the screen.
7. To use the selected connection, connect the phone to Phoenix with correct service tools, make sure that it
is switched on and select Scan Product.
When a product is found, Phoenix will load product support. Name of the loaded product support module
and its version information will be shown on the bottom of the screen.
Page 3–24
Figure 42 Connections list
Figure 43 Connection information
Figure 44 Scan product
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
RH-64
Phoenix service software
9243363 (Issue 1)