Repairing Phoenix Installation - Nokia RH-64 Service Manual

Nokia Customer Care

Repairing Phoenix installation

Context
If you experience any problems with the service software, or suspect that files have been lost, you can use the
repair function before completely reinstalling Phoenix.
Note: The original installation package (for example, phoenix_service_sw_a15_2004_24_7_55.exe) must
be found on your PC when you run the repair setup.
Steps
1. Open Windows Control Panel → Add/Remove Programs .
2. Select Phoenix Service Software → Add/Remove .
3. In the following view, choose Repair.
Phoenix will now reinstall components and register them. The procedure is the same as in the update
installation.
Page 3–14
Figure 21 Restart computer
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
RH-64
Phoenix service software
9243363 (Issue 1)