Nokia 2125 Disassembly/Assembly
Hide thumbs
Also See for 2125:
- User manual (169 pages) ,
- Troubleshooting manual (50 pages) ,
- Troubleshooting manual (12 pages)
Related Manuals for Nokia 2125
Summary of Contents for Nokia 2125
- Page 1 Nokia Customer Care 2125/2125i/2126/2126i/2128i (RH-71) Mobile Terminals Disassembly/Assembly ©2005 Nokia Corporation ISSUE 1 08/2005 Company Confidential...
-
Page 2: Table Of Contents
2125/2125i/2126/2126i/2128i (RH-71) Disassembly/Assembly Contents Page Safety Information ............................3 ESD Protection ............................. 3 Assembly Instructions ........................... 4 Disassembly Instructions ..........................4 1. Remove the Battery Cover (B-cover) ....................4 2. Remove the A-cover and Keymat ...................... 4 3. Remove the Screws ..........................5 4. -
Page 3: Safety Information
• Every repair action involving opening the mobile terminal or handling the mobile terminal components must be done under ESD protection. • ESD-protected spare part packages MUST NOT be opened/closed outside an EPA. For more detailed information about ESD protection and EPAs, contact your local Nokia Customer Care representative. ©2005 Nokia Corporation... -
Page 4: Assembly Instructions
2125/2125i/2126/2126i/2128i (RH-71) Disassembly/Assembly Assembly Instructions To assemble the mobile terminal, follow the "Disassembly Instructions" in reverse order. Disassembly Instructions Use the following steps to disassemble the mobile terminal. 1. Remove the Battery Cover (B-cover) A. Turn the mobile terminal off. -
Page 5: Remove The Screws
2125/2125i/2126/2126i/2128i (RH-71) Nokia Customer Care Disassembly/Assembly If necessary, apply pressure with a screwdriver to unlock the snaps on each side that lock the A-cover and D-cover together. Snaps A-cover 3. Remove the Screws Use a screwdriver to remove the six screws in the order shown. -
Page 6: Remove The Pwb Assembly
2125/2125i/2126/2126i/2128i (RH-71) Disassembly/Assembly 4. Remove the PWB Assembly Starting at the bottom end, carefully lift the PWB assembly off the D-cover. Be sure not to damage the guide pin in the upper right corner of the D-cover. Be careful not to damage the guide pin. -
Page 7: Remove The Vibra, Microphone, And Dc Jack
2125/2125i/2126/2126i/2128i (RH-71) Nokia Customer Care Disassembly/Assembly 6. Remove the Vibra, Microphone, and DC Jack Use a tweezers to carefully remove the vibra (A), microphone (B), and DC jack (C) from the D-cover. 7. Remove the UIM Label Disconnect the UIM label from the PWB shield. (Tweezers are optional.) ©2005 Nokia Corporation... -
Page 8: Disconnect The Pwb Shield
2125/2125i/2126/2126i/2128i (RH-71) Disassembly/Assembly 8. Disconnect the PWB Shield (A) Apply outward pressure to a side of the D-cover while (B) pushing up on the PWB shield to remove it from the assembly. Apply outward pressure to the side of the D-cover 9.