Supported Resolution - BenQ PD Series User Manual

1. Set each monitor ready for connection. On each monitor, go to
, and select
MST ON
launched and configured only when input signal is detected.
2. Connect the first monitor to your laptop using a DP cable.
3. Connect the second monitor to the first one using a DP cable as illustrated.
4. Follow Step 3 to connect the third and the fourth monitors if desired.
5. All the ports on the monitor base will be disabled during MST as USB Type-C connection
is not in use. You should connect the USB peripherals, RJ45 cable, and power supply to
the laptop and manage the display from there.
6. Power on the laptop and the monitors.
7. On your laptop, decide the way you want the content to be displayed on the connected
monitors:
Duplicate
separately) may be used to manage the display. Refer to the manual of the purchased
software for more information.
If connectivity of monitor base is preferred during MST, connect the first monitor to your laptop using a USB
Type-C and a DP cable in Step 2. The monitor base now supports power supply for your laptop, and all except
the DP-OUT port should be working.
>
System OSD Settings
>
MST ON
> >
System DP DP 1.2

Supported resolution

To perform MST, a limited number of connected monitors is required to ensure image quality.
The following information shows the image resolution available to each monitor.
st
1
Supported 2560 x 1440
resolution (60Hz)
2560 x 1440
(60Hz)
2560 x 1440
(60Hz)
2560 x 1440
(60Hz)
Make sure the graphic card on your laptop supports DP 1.2 for MST. Please also be noted that the supported
number of monitors for connection may vary by graphic card. To find out the capability of your graphic card,
check its specifications or contact its manufacturer.
. Go to >
System
, , or
Extend Projector only
>
DP cable
nd
monitor 2
2560 x 1440
(60Hz)
1920 x 1080
(60 Hz)
1920 x 1080
(60 Hz)
1280 x 1024
(60 Hz)
, and select
DP DP 1.2
. Additional software (purchased
>
System OSD Settings
>
MST ON
> >
System DP DP 1.2
LAN
rd
monitor 3 monitor
1920 x 1080
(60 Hz)
1920 x 1080
(60 Hz)
1280 x 1024
(60 Hz)
1280 x 1024
(60 Hz)
>
System OSD Settings
. Note the OSD menu can be
>
DP cable
USB Type-C
cable
th
4 monitor
N/A
N/A
1280 x 1024
(60 Hz)
1280 x 1024
(60 Hz)
How to adjust your monitor
>
35