How To Assemble Your Monitor Hardware When Working With A Desktop - BenQ PD Series User Manual

How to assemble your monitor hardware when working
with a desktop
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. The location and available input and output jacks may
vary depending on the purchased model.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor surround and controls.
While the monitor is still inside the box, hold the upper
section of the plastic bag to take out the monitor.
Remove the bag carefully.
Never grasp the monitor edge, as your monitor is an edge to
edge monitor and should be handled with care. Excessive
force on the display is prohibited.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like the
monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded
surface.
Orient and align the stand arm with the monitor, then
push them together until they click and lock into place.
1
How to assemble your monitor hardware when working
2
11