BenQ PD Series User Manual page 23

8. Organize the cables.
Organize the power cord and the DP cable just
connected to the monitor through the cable
management hole on the stand.
9. Connect-to and turn-on the power.
Plug the other end of the both power cords into
appropriate power outlets and turn them on.
Picture may differ from product supplied for your region.
On both the monitor and the base, make sure the
power switch is switched to ON.
Turn on the monitor by pressing the power button on
the monitor.
LAN
On the monitor
LAN
On the base
How to assemble your monitor hardware when working 23